<?xml version="1.0" encoding="UTF-8"?>
<XML><RECORDS>
<RECORD>
	<REFERENCE_TYPE>0</REFERENCE_TYPE>
	<AUTHORS>
		<AUTHOR>Michelsen, H. A.</AUTHOR>
	</AUTHORS>
	<YEAR>2006</YEAR>
	<TITLE>Laser-induced incandescence of flame-generated soot on a picosecond timescale</TITLE>
	<SECONDARY_TITLE>Applied Physics B: Lasers and Optics</SECONDARY_TITLE>
	<VOLUME>83</VOLUME>
	<NUMBER>3</NUMBER>
	<PAGES>443 - 448</PAGES>
	<DATE>06/2006</DATE>
	<ABSTRACT>This paper presents measurements of time-resolved laser-induced incandescence (LII) from soot recorded on a picosecond time scale. The 532-nm output from a picosecond Nd:YAG laser was used to heat the soot, and a streak camera was used to record the LII signal. The results are compared with data collected on a nanosecond time scale and with a time-dependent model that solves the energy- and mass-balance rate equations. Relative to the laser timing, the picosecond and nanosecond results are very similar. Signals increase during the laser pulse as soot temperatures increase and decrease after the laser pulse. The signal decay rates increase significantly with increasing laser fluence. The LII model gives good agreement with the nanosecond data at fluences &Atilde;&cent;&acirc;€&deg;&Acirc;&curren;0.2 J/cm2 and underpredicts the signal decay rates at higher fluences. The picosecond temporal profiles increase significantly faster and earlier in the laser pulse than predicted by the model. This disagreement between the model and picosecond LII data may be attributable to perturbations to the signal by laser-induced fluorescence from polycyclic aromatic hydrocarbons or other large organic species. The excited state or states responsible for this fluorescence appear to be accessed via a two-photon transition and have an effective lifetime of 55 ps.</ABSTRACT>
	<URL>http://dx.doi.org/10.1007/s00340-006-2226-x</URL>
</RECORD>
</RECORDS></XML>